KLOVER HOME app: Klover pellet stoves and boilers managed over Wi-Fi, also remotely

KLOVER HOME is the Klover app for the Wi-Fi management of pellet appliances. With KLOVER HOME the stove becomes a connected system: ignition, shutdown, power, temperature and operating status are monitored and adjusted from the app in real time, also remotely.

On the Klover technologies page, Wi-Fi management with KLOVER HOME App is described as an advanced control system with a clear, intuitive and immediate interface, which makes it possible to communicate with the appliance at any time and from anywhere. The same page sums up the technology in one sentence: the stove is no longer just a heating product, but a smart system integrated into the home.

The KLOVER HOME app monitors and adjusts the operation of the pellet appliance in real time. The Klover technologies page lists five functions: ignition, shutdown, power, temperature and operating status. All of them remain under control also remotely, that is, away from the room where the appliance is installed.

Among the advantages of KLOVER HOME, the technologies page lists four points: complete and continuous control, optimized consumption, greater comfort and safety, and easy management even for non-expert users.

Two data sheets add programming. For ONE 8s, the touch screen handset and the built-in Wi-Fi make it possible to control operation, temperature and programming also remotely; for ONE 10s, the data sheet mentions remote control and precise programming of operation. The control systems of Klover stoves, programmable thermostat included, are covered in the article on the programmable pellet stove.

Nine Klover pellet stoves declare built-in Wi-Fi in their data sheet: SOFT 8s, SOFT 10s, SUPER 7s, SUPER 9s, OBLÒ 8s, ONE 8s, ONE 10s, VERTICAL 10s and VERTICAL 10s STONE. The data sheets pair the Wi-Fi with the touch handset or touch remote control, and on all nine KLOVER HOME appears among the technologies of the product.

The data sheets of SOFT 8s, SUPER 7s, SUPER 9s and OBLÒ 8s specify that the pellet stove can also be controlled remotely.

SOFT 8s, SUPER 7s, OBLÒ 8s and ONE 8s declare a nominal heat output of 7.8 kW, an efficiency of 93% and a heating area of 70 m². SOFT 10s, SUPER 9s, ONE 10s, VERTICAL 10s and VERTICAL 10s STONE declare 10 kW, an efficiency of 92% and a heating area of 90 m².

Eight Klover pellet boilers declare in their data sheet a touch display with smart management and optional Wi-Fi via the KLOVER HOME app: ECOMPACT 20, ECOMPACT 23, ECOMPACT 26, ECOMPACT 29, ECOMPACT 32, ECOMPACT 35, DIVA 26 and DIVA 32. On all the ECOMPACT models the touch display is in colour.

The ECOMPACT models declare an efficiency from 92.5% to 92.8%. ECOMPACT 20 declares a nominal heat output of 19.1 kW and a heating volume of 470 m³, ECOMPACT 23 22.6 kW and 550 m³, ECOMPACT 26 25.1 kW and 620 m³, ECOMPACT 29 27 kW and 660 m³, ECOMPACT 32 30.5 kW and 750 m³, ECOMPACT 35 32.4 kW and 800 m³.

DIVA 26 declares 26 kW, an efficiency of 92.6% and a heating volume of 620 m³; DIVA 32 declares 32 kW, an efficiency of 92.8% and 750 m³. On these eight pellet boilers the Wi-Fi is listed as optional, and the on-board control is the touch display.

Wi-Fi management with KLOVER HOME takes the controls of the pellet appliance beyond the room where it is installed. Ignition, shutdown, power and temperature are adjusted from the app at any time, and the operating status is checked in real time.

According to the Klover technologies page, KLOVER HOME brings together powerful functions in a single app and makes advanced technology accessible in everyday use, even for non-expert users.

In short, KLOVER HOME is the app for the Wi-Fi management of Klover pellet appliances: the data sheets declare built-in Wi-Fi on nine pellet stoves and optional Wi-Fi on eight pellet boilers. The complete data sheets, with all the technical data and the control system of each model, are on klover.it: a quote can be requested from the page of each product.